What if the PIN shown does not match on both devices?

Cancel the pairing attempt, turn Bluetooth off and back on on the phone, then start again from Tap on Pair new device. Mismatched PINs almost always mean the phone picked up a different nearby device by mistake.

Can I have several Bluetooth accessories paired at the same time?

Yes, OxygenOS stores multiple paired devices under Bluetooth in the settings, but usually only one audio device is actively connected at once. Tap the accessory you want to use to switch the active connection.

Why does my speaker reconnect to my old phone instead of the OnePlus?

The speaker remembers the last device it was paired with and reconnects to it automatically when Bluetooth on that device is active. Turn Bluetooth off on the old phone or forget the pairing there, then pair it fresh with the OnePlus.

OnePlus

OnePlus: Pair a Bluetooth Device

If your OnePlus phone does not detect your headphones, speaker, or inEars, the accessory is often still in a locked pairing state or Bluetooth is switched off on the phone. Sometimes a short PIN prompt shows up during the connection and has to be confirmed on both sides before audio actually starts working.

Updated: 07.08.20265 min6 steps

VersionAndroid 10 · Oxygenos 10

Step by step

1 / 6

Open the Settings

1 / 6

Scroll or use the buttons for the next step

Live simulator

Android 10 · Oxygenos 10

Open the Settings

1 / 6

Scroll or use the buttons for the next step

Feedback

Was the guide correct?

Help others: confirm the path or report a problem.

Confirmations

Forum verified this path

OnePlus

Pair a Bluetooth Device auf OnePlus

Bluetooth pairing on a OnePlus phone fails most often for one of two reasons: the accessory is not actively broadcasting a pairing signal, or Bluetooth on the phone itself is turned off. Headphones, speakers, and inEars usually need to be put into pairing mode manually, often by holding a button until an LED starts blinking.

The connection itself is handled by the Bluetooth service inside OxygenOS. You reach the pairing screen through Open the Settings ➔ Tap on Bluetooth & device connection ➔ Tap on Bluetooth ➔ Tap on Pair new device. Any accessory currently discoverable shows up under available devices within a few seconds.

Tap Choose an available device and confirm with Tap on Pair. For most accessories this single confirmation is enough. Some devices display a numeric PIN on their own screen or trigger a PIN prompt on the phone; entering or confirming the same code on both sides completes the pairing.

If the accessory was previously paired with another phone or tablet, it may stay connected there instead of appearing on your OnePlus. Turning Bluetooth off on the other device first usually frees it up for a new pairing attempt.

Frequently asked questions

Put the accessory back into pairing mode, often by holding the power or connect button until the LED blinks rapidly. Then reopen Open the Settings ➔ Tap on Bluetooth & device connection ➔ Tap on Bluetooth and check the list again after a few seconds.

Compatible devices

Tap your device — opens its hub with matching guides.

Android 10 · Oxygenos 10

OnePlus 7T Pro 5G McLaren OnePlus 8 OnePlus 8 Pro OnePlus N10 OnePlus Nord OnePlus Nord N100

Network & Connectivity

OnePlus: Pair a Bluetooth Device

Step by step

Was the guide correct?

Pair a Bluetooth Device auf OnePlus

Frequently asked questions

Compatible devices

More guides for OnePlus

Open WiFi Network Notification

Enable or Disable Bluetooth Tethering

Switch Automatically Between Wi-Fi and Mobile Data

Enable or Disable SIM Card Lock