Set Up Mobile Hotspot with a Custom Name and Password
The first time you turn on the mobile hotspot on a Samsung phone, it broadcasts under the device name with an autogenerated password. That default network name is often confusing for guests and reveals your phone model to anyone scanning nearby networks. You can replace both the name and password before sharing your connection.
Select Network Manually
Near a border or while traveling abroad, your Samsung phone often locks onto whichever foreign network has the strongest signal, not the cheapest one. That automatic choice can mean higher roaming charges than a neighboring operator would offer for the same coverage. Switching to manual selection lets you pick the exact network yourself instead of leaving it to the phone.
Move Contacts to Another Storage Location
If your contacts are split between the SIM card, the phone memory and a synced account, finding the right entry can get confusing fast. Samsung's contact app lets you shift entries from one storage location to another without deleting and re-adding them. This matters most when you swap SIM cards, switch accounts, or clean up duplicate entries after a sync.
Connect to Wi-Fi via QR Code
Typing out a long WLAN password on a guest's phone wastes time and usually ends in a typo or two. Samsung's Wi-Fi QR code scanner reads the network credentials straight from another device's shared code, so you skip manual entry completely. The catch: the other device has to generate and display that QR code first before your phone can scan it.
Turn USB Tethering On or Off
If your laptop or PC does not pick up an internet connection after you plug in your Samsung phone, USB tethering is probably still switched off. This feature routes your mobile data through the USB cable instead of Wi-Fi, which helps when public Wi-Fi is blocked, slow, or unavailable. Without the toggle enabled, the computer detects the cable but never actually goes online.
Enable Suspicious Network Detection for Wi-Fi
Connecting to a public Wi-Fi hotspot at a cafe or airport can quietly redirect your traffic through a rogue captive portal without any warning on screen. Samsung devices include a background check that flags this kind of suspicious network behavior, but the toggle for it is easy to miss and sometimes gets switched off during a reset. If the feature is disabled, your phone stays silent even when a network tries to intercept requests.
Turn Wi-Fi On or Off
If your Samsung phone refuses to connect to your router or keeps burning through battery searching for networks, the Wi-Fi toggle might simply be off or stuck on. Wi-Fi handles both local file sharing and your main path to the internet, so a wrong setting here blocks every online app at once. Switching it on or off from the system settings usually clears up connection drops and unwanted background scanning.
Install Ad Blocker in Samsung Internet
If every page load buries the content under banners, pop-ups, and autoplay video ads, Samsung Internet is missing an ad blocker extension. The browser does not filter ads on its own, so pages stay cluttered and load slower until you add one yourself. Some heavy ad-driven sites can even make scrolling feel laggy on older devices.
Turn On Wi-Fi Sharing (Wi-Fi Repeater Mode)
Your Samsung phone's Mobile Hotspot normally broadcasts your mobile data connection, not the Wi-Fi network you are already connected to. If you want the phone to act as a repeater and extend an existing Wi-Fi signal to other devices, that behavior sits behind a separate 'Wi-Fi sharing' switch hidden inside the hotspot's advanced settings. Without enabling it, devices that join your hotspot stay on cellular data even though your phone already has a working Wi-Fi connection.
Change Camera Storage Location
If your Samsung phone keeps saving new photos and videos to the SD card even though you want them on internal storage, the default save location in the camera app is set to the memory card. Switching this setting only affects future shots. Anything already saved to the card stays there and does not move automatically.
Connect to a Wi-Fi Network
If your Samsung phone shows no internet access or keeps dropping the connection at home, the Wi-Fi network is often not paired correctly yet. A saved profile with an outdated password can also block a new connection attempt. This mostly happens after a router change or a forgotten network entry.
Turn Google Location History On or Off
If your Samsung phone keeps a detailed timeline of every place you visit, including timestamps and how you got there, Google location history is doing more than most people realize. Recommendations and personalized maps rely on this data, but many users only notice the tracking after checking their timeline. Knowing where the toggle lives helps you decide whether that trade-off is worth it.
Unpair a Bluetooth Device
When a Bluetooth accessory keeps reconnecting automatically or you no longer trust a device on the list, removing the pairing is the only reliable fix. A simple disconnect just drops the current link but leaves the device saved, so it reconnects the next time it is nearby. Unpairing removes the stored connection completely and forces a fresh setup if you ever want to use it again.
Send a File via Bluetooth
Sharing a photo or document with a paired Bluetooth device does not always work through the usual share sheet. If the receiving phone or tablet does not show up in the device list, the transfer stalls before it starts. This applies to photos, documents and videos moved directly between two Samsung devices without Wi-Fi or a cable.
Set Apps to Always Use Mobile Data
If a messaging or banking app keeps burning through your mobile data plan while your phone shows a strong WLAN signal, Samsung's data usage settings are usually the reason. One UI lets you pin specific apps to mobile data only, and once that switch is on, the app ignores WLAN completely, even when the connection is fast and free. This setting is easy to flip by accident and easy to forget once it stays active.
Show or Hide Wi-Fi Network Quality Info
If your Wi-Fi list only shows network names, you cannot tell before connecting whether a network will actually be fast or barely usable. Samsung phones can add a quality label like Very fast, Fast, Normal, or Slow right next to each network in the list. This option lives inside the Wi-Fi advanced settings and most people never turn it on.
Play Tone When Call Connects
If you dial a number and hear nothing until the other person picks up, the connection tone that normally confirms an outgoing call has been switched off. Some Samsung phones ship with this sound disabled after a system update, so you lose the familiar ring back tone. The setting sits in the call settings and is easy to miss if you are not looking for it by name.
Set Default SIM Card for Mobile Data
If mobile data feels slow after inserting a second SIM, your Samsung phone is likely still pulling data through SIM card 1 by default. On some models only that first slot supports fast LTE, so calls or texts on SIM 2 work fine while data stays sluggish. Switching the active data SIM fixes this without removing either card.
Lock Network and Security Setting
If your Samsung phone drops its Wi-Fi or mobile data connection every time the screen locks, Find My Mobile can lose track of the device the moment it goes missing. The Lock network and security option controls exactly this behavior and keeps the connection alive while the screen is off. Without it enabled, locating or remotely controlling a lost phone becomes much harder.
Turn Wi-Fi Calling On or Off
If calls keep dropping in areas with weak mobile signal but strong Wi-Fi, your Samsung phone probably has Wi-Fi Calling turned off. This feature lets the device route voice calls over a wireless network instead of the regular cellular connection. Whether it needs to be on or off depends on your carrier and where you spend most of your time on a call.
Turn Location Tags On or Off for Photos and Videos
Every photo or video you shoot with the Samsung Camera app can quietly attach your exact GPS coordinates to the file. Share that picture online or send it to someone, and the location data travels with it, revealing exactly where it was taken. Most people only notice this after a photo has already exposed a home address or workplace.
Wi-Fi Auto Reconnect Toggle
If your Samsung phone keeps rejoining a Wi-Fi network you deliberately left, or refuses to reconnect to a saved network on its own, the Auto reconnect setting is the reason. This option decides whether the device automatically re-establishes a connection to networks it has used before. When it is turned off, you have to tap the network manually every time it comes back into range.
Add a Wi-Fi Network Manually
If your router does not appear in the Wi-Fi list, it usually means the network is hidden and not broadcasting its name. In that case you have to add it by hand using the exact SSID and, if the network is secured, the correct password. A typo in either field is the most common reason the connection still fails afterward.
Turn Bluetooth On or Off
If your Samsung phone keeps reconnecting to a car stereo or speaker you did not want right now, Bluetooth is still active in the background. Leaving the radio running also uses a small amount of battery even with nothing paired. Switching it off stops these automatic reconnections until you turn it back on.