Change SIM PIN
The PIN that comes preset on a new SIM card is rarely one you can memorize, and typing the wrong code repeatedly locks the card. On Xiaomi phones you can swap it for a PIN you actually remember, but the option sits a few menus deep under network security settings rather than in the main lock screen settings.
Turn Bluetooth On or Off
If a Bluetooth headset, speaker, or car kit will not pair with your Xiaomi phone, Bluetooth is often still switched off or was never fully enabled after a restart. The Quick Settings toggle can also drift out of sync with the actual radio state, which leaves paired devices unable to reconnect until you check the setting directly.
Change SIM Card Name
Two SIM cards from the same carrier look identical on your Xiaomi phone, so it is easy to grab the wrong one for a call or a mobile data session. MIUI shows a generic carrier label for each slot by default, which does not tell you which SIM is your personal number and which one is for work or travel. Giving each SIM card its own name in the phone settings clears up that confusion for good.
Turn USB Tethering On or Off
When you plug your Xiaomi phone into a PC or laptop to share its mobile data, the computer often prompts you to pick a connection type instead of connecting automatically. This happens because USB tethering sits in a separate toggle from your regular USB file-transfer mode. Without switching it on first, the cable only charges the phone or transfers files instead of sharing the data connection.
Add a Printer via IP Address or Wi-Fi Direct
If your printer does not show up automatically even though your phone and printer share the same Wi-Fi network, MIUI still lets you add it manually. This usually happens with older printers, devices on a different subnet, or printers that only support Wi-Fi Direct instead of standard network discovery. In that case you need to enter the printer's IP address yourself or switch on Wi-Fi Direct printing directly from the printing menu.
Turn Off Wi-Fi Hotspot Automatically
Leaving the personal hotspot active after every connected device disconnects quietly drains battery on Xiaomi phones. MIUI includes a setting that shuts the hotspot down on its own once nothing is using it, but most owners never notice it exists.
Set Up Unlock with Bluetooth Device
If your Xiaomi phone stays locked even though your paired Bluetooth accessory is nearby, the Unlock with Bluetooth device feature is probably still off. Once active, the phone unlocks automatically near that device and stays unlocked as long as the connection holds. This only works with Xiaomi's own Bluetooth accessories, not with third-party headphones or wearables.
Pair a Bluetooth Device
If your headset, earbuds, or speaker will not connect to your Xiaomi phone, the accessory usually needs to be paired first before Bluetooth can use it. Until pairing finishes, the phone will not list it as an active connection, so audio and calls stay on the built-in speaker.
Auto-download Updates via Mobile Data
If your Xiaomi phone keeps pulling system updates in the background while you are off Wi-Fi, mobile data usage can climb fast without warning. MIUI treats update downloads as automatic once a new version is detected, and a separate toggle decides whether mobile data counts as an allowed source for that download. Switching it off limits update downloads to Wi-Fi only, which matters if you are on a limited plan.
Send Photos and Videos via Bluetooth
Sending a photo or video from your Xiaomi phone to a paired device sometimes stalls right after you tap Share, or the target device never shows up in the list. This usually comes down to picking the wrong sharing option or Bluetooth pairing not being active. The steps below use MIUI's file sharing menu, which works the same for pictures, videos and most other file types.
Set Up a Portable Wi-Fi Hotspot
If your Xiaomi phone still hands out a hotspot name and password nobody chose, other people nearby can guess it or connect without permission. A weak default SSID also makes it harder to spot your own hotspot among several devices in the same room. Setting a custom name and password fixes both problems and keeps the connection under your control.
Select Network Manually
When you travel abroad and your phone keeps hanging on a weak carrier, automatic network selection is usually the cause. MIUI picks a network by signal priority, not by actual reception quality, so calls drop and data stalls even though a stronger carrier is available nearby. Switching to manual selection lets you pick that carrier yourself instead of waiting for the phone to reconnect.
Turn Off Wi-Fi and Bluetooth Scanning for Location
Even with Wi-Fi and Bluetooth switched off, your Xiaomi phone can still scan nearby networks and devices to sharpen its location fix. Apps with location permission trigger this background scanning automatically, keeping your radios active more often than expected. If you want tighter control over when your phone searches for networks, the scanning setting needs to be adjusted separately from the Wi-Fi and Bluetooth toggles.
Rename a Paired Bluetooth Device
When several Bluetooth accessories are paired to your Xiaomi phone, the device list can quickly fill up with cryptic model numbers or partial MAC addresses. Telling a pair of earbuds apart from a car stereo or a fitness tracker gets difficult once the default names look identical. Renaming each paired device gives you a clear label instead of guessing which entry belongs to which gadget.
Set Default SIM Card for Outgoing Calls
Every time you dial a number, your Xiaomi phone pops up a menu asking which SIM card to use for the call. If you only ever tap the same option anyway, that extra confirmation step just slows down dialing. A fixed default SIM removes the prompt for good.
Change Password for a Saved Wi-Fi Network
If your router password changed, your Xiaomi phone still tries to connect with the old one and just shows Saved, not connected. This is common after a router reset or a switch to a new internet provider. You do not need to forget the network and start over, the saved entry can be updated directly.
Set a Daily Mobile Data Usage Limit
A monthly data cap does not catch the one day you binge-watch or download something huge, and by the time the monthly warning fires the damage is done. On Xiaomi phones you can add a separate daily threshold so heavy usage gets flagged the same day it happens. You also decide whether MIUI just warns you or cuts mobile data automatically once the limit is hit.
Turn Emergency Location Service (ELS) On or Off
If first responders cannot pinpoint your position during an emergency call or text, Emergency Location Service on your Xiaomi phone may be switched off. This feature sends your current GPS position automatically whenever you dial an emergency number, but it only works if the setting is active and your wireless carrier supports it. Some users disable it by accident while adjusting location permissions, which delays help in a real emergency.
App Location Permission Settings
If a Xiaomi app keeps showing the location icon even when you are not actively using it, its permission is probably set to allow access all the time. That drains battery and can expose more data than the app actually needs. You can review and change this setting for every installed app individually.
Save Location Info for Photos and Videos
Photos and videos from the Xiaomi camera arrive without any location tag, so sorting vacation shots by place later only works if you remember the trip yourself. That happens because the camera option for saving location info sits switched off out of the box. Turning it on lets the Camera app attach GPS coordinates to every photo and video you capture.
Turn Google Location History On or Off
If Google Maps keeps suggesting places based on where you have been, or your Timeline fills up with stops you never meant to save, Location History is still active in the background. On Xiaomi phones this tracking can run even when no Google app is currently open, which surprises a lot of users checking their data usage or battery drain.
Share Wi-Fi Password via QR Code
Typing out a long Wi-Fi password for every visitor gets tedious, especially with random letter-number combos. Xiaomi phones can turn your current network credentials into a scannable QR code instead. Anyone with a camera can then join the network without you dictating a single character.
Set the Action for When Your Data Plan Runs Out
If your mobile data suddenly stops working before the month is over, MIUI may already be cutting it off automatically once you hit your set limit. Some people only want a heads-up instead of losing their connection outright, but that only works if the right action is selected in the data usage settings. Without checking this setting, you can end up with dead mobile data at the worst possible moment.
Set Wi-Fi Hotspot Data Limit
If your mobile data plan drains fast whenever you share your Xiaomi phone's Wi-Fi hotspot with a laptop or tablet, an unlimited hotspot session is usually the cause. MIUI lets you cap the exact amount of data the hotspot can share and pick what happens once that cap is reached.