Skip to content
TechBone
Realme

Realme: Change the Alarm Volume

If your alarm barely wakes you up or suddenly blasts at full volume, the ringtone or media slider is not the setting responsible. Realme UI gives alarms their own independent volume control that has nothing to do with call or notification sound. Once that slider sits at the wrong level, no amount of adjusting media volume will fix it.

3 min3 steps
VersionAndroid 11 · Realme UI 2

Step by step

1 / 3

Step 1 of 3: Tap on **Settings**

1

Tap on Settings

Live simulator

Android 11 · Realme UI 2
Change Alarm Volume – Realme UI 2: step 1 – Tap on Settings
Tap on Settings
1 / 3

Scroll or use the buttons for the next step

Feedback

Was the guide correct?

Help others: confirm the path or report a problem.

99

Confirmations

Forum verified this path

Realme

Change Alarm Volume auf Realme

Alarm volume on Realme phones is controlled separately from ringtone, media, and notification volume. This separation exists so a muted or quiet ringtone does not accidentally silence your morning alarm, but it also means adjusting media volume has zero effect on how loud your alarm sounds.

The setting lives in the sound controls of the system settings and works as a stepless slider rather than fixed volume levels. That gives finer control, but it also makes it easy to leave the slider too low by accident, especially after a system update resets some sound preferences.

To change it, go to Tap on SettingsTap on Sound & vibrationSet the Alarms volume. Drag the slider to test the volume in real time before saving.

If alarms still do not sound at night, check whether a scheduled Do Not Disturb or Focus mode is muting sound output entirely, since that can override the alarm slider on some configurations. In that case, adjusting the Do Not Disturb exceptions solves the problem faster than changing the volume slider again.

Frequently asked questions

Check whether a Focus mode or Do Not Disturb schedule is active, since some configurations mute all sound including alarms regardless of the slider position. Open the Focus mode settings and confirm alarms are listed as an allowed exception.